RA Maxwell is now RAM Manufacturing Equipment. Read more…

Products – Parts

31 - 40 of 116 products

  • Thompson Machinery Overload Relay 30-40 AMP - LDR340
    Overload Relay 30-40 AMP - LDR340

    Overloads, what are they used for?
    An electric overload occurs when too much current passes through electric wires. The wires heat and can melt, with the risk of starting a fire.
    Schneider Overloads provide protection against too much current that would cause overheating of the protected equipment.
    The Schneider Overload has been a trusted brand used by Thompson Meat Machinery. They use them in their Mixer/Grinders, Flakers, Band Saws, and Pre-Breaker’s

  • Thompson Machinery Overload Relay Sch.4-6 AMP LRD10
    Overload Relay Sch.4-6 AMP LRD10

    Overloads, what are they used for?
    An electric overload occurs when too much current passes through electric wires. The wires heat and can melt, with the risk of starting a fire.
    Schneider Overloads provide protection against too much current that would cause overheating of the protected equipment.
    The Schneider Overload has been a trusted brand used by Thompson Meat Machinery. They use them in their Mixer/Grinders, Flakers, Band Saws, and Pre-Breaker’s

  • Thompson Machinery Air Switch Single Pole
    Air Switch Single Pole

  • Thompson Machinery Controller Relay Fail Safe 24VDC - 1 N/O + 2 N/C
    Controller Relay Fail Safe 24VDC - 1 N/O + 2 N/C

  • Thompson Machinery Membrane Switch - 2 Buttons Clear Window Timer
    Membrane Switch - 2 Buttons / Clear Window Timer

  • Thompson Machinery 900EPCB Assembly 50 x 50mm
    PCB Assembly 50 x 50mm

  • ansell High Flex Gloves
    • The 11-541 epitomizes the convergence of protection and performance. It features an 18G ultralight weight liner with INTERCEPT™ Technology yarns that provides ANSI CUT Level 4 / EN CUT level 4 protection. The liner also features ZONZ™ Comfort Fit Technology for breathability and ergonomic movement. The palm dipped coating and the FORTIX™ Technology formulation provide enhanced abrasion resistance and grip. To provide all four advanced performance technologies, including ANSI CUT Level

  • Thompson Machinery Contactor 18.5kW 38A @ 24VAC 50/60H CNTRS185 - LC1 D38B7
    Contactor 18.5kW 38A @ 24VAC 50/60H CNTRS185 - LC1 D38B7


    Contactors, what are they used for?

    A contactor is an electrically controlled switch used for switching an electrical power circuit, such as a 24-volt coil electromagnet controlling a 230-volt motor switch.

    Schneider Contactors has been a trusted brand used by Thompson Meat Machinery. They use them in their Mixer/Grinders, Flakers, Band Saws, and Pre-Breaker’s.

    The Schneider Contactors are just one more reason to purchase

  • Thompson Machinery Contactor 25KW 50A @ 24VAC 50/60Hz CNTRS30- LC1D50A
    Contactor 25KW 50A @ 24VAC 50/60Hz CNTRS30- LC1D50A


    Contactors, what are they used for?

    A contactor is an electrically controlled switch used for switching an electrical power circuit, such as a 24-volt coil electromagnet controlling a 230-volt motor switch.

    Schneider Contactors has been a trusted brand used by Thompson Meat Machinery. They use them in their Mixer/Grinders, Flakers, Band Saws, and Pre-Breaker’s.

    The Schneider Contactors are just one more reason to purchase a T

  • Thompson Machinery Contactor 37KW 65A @ 24VAC 50/60Hz- CNTRS37- LC1D65A
    Contactor 37KW 65A @ 24VAC 50/60Hz- CNTRS37- LC1D65A


    Contactors, what are they used for?

    A contactor is an electrically controlled switch used for switching an electrical power circuit, such as a 24-volt coil electromagnet controlling a 230-volt motor switch.

    Schneider Contactors has been a trusted brand used by Thompson Meat Machinery. They use them in their Mixer/Grinders, Flakers, Band Saws, and Pre-Breaker’s.

    The Schneider Contactors are just one more reason to purchase a Tho
31 - 40 of 116 products