Products – Parts

1 - 10 of 119 products

  • Thompson Machinery Contactor 15 KW 32A @ 24VAC 50/60Hz CNTRS15- LC1D32B7
    Contactor 15 KW 32A @ 24VAC 50/60Hz CNTRS15- LC1D32B7

    Contactors, what are they used for?

    A contactor is an electrically controlled switch used for switching an electrical power circuit, such as a 24-volt coil electromagnet controlling a 230-volt motor switch.

    This Thompson Machinery Contactor 15 KW 32A @ 24VAC 50/60Hz CNTRS15- LC1D32B7 is used for Thompson Meat Machinery: Mixer/Grinders, Flakers, Band Saws, and Pre-Breaker’s.

    R.A. Maxwell and Associates is located in Corona, Cal

  • Thompson Machinery Contactor 22 KW 40A @ 24VAC 50/60Hz- CNTRS22- LC1D40A
    Contactor 22 KW 40A @ 24VAC 50/60Hz- CNTRS22- LC1D40A

    Contactors, what are they used for?

    A contactor is an electrically controlled switch used for switching an electrical power circuit, such as a 24-volt coil electromagnet controlling a 230-volt motor switch.

    This Thompson Machinery Contactor 22 KW 40A @ 24VAC 50/60Hz- CNTRS22- LC1D40A is used for Thompson Meat Machinery: Mixer/Grinders, Flakers, Band Saws, and Pre-Breaker’s.

    R.A. Maxwell and Associates is located in Corona, Calif

  • Thompson Machinery Contactor 4KW 9A @24VAC 50/60 Hz - CNTRS04-LC1 D09
    Contactor 4KW 9A @24VAC 50/60 Hz - CNTRS04-LC1 D09


    Contactors, what are they used for?

    A contactor is an electrically controlled switch used for switching an electrical power circuit, such as a 24-volt coil electromagnet controlling a 230-volt motor switch.

    This Thompson Machinery Contactor 4KW 9A @24VAC 50/60 Hz - CNTRS04-LC1 D09 is used for Thompson Meat Machinery: Mixer/Grinders, Flakers, Band Saws, and Pre-Breaker’s.

    R.A. Maxwell and Associates is located in Corona, Californi

  • Thompson Machinery Contactor 5.5KW 12A @ 24V 50/60 Hz CNTRS75- LC1 D12
    Contactor 5.5KW 12A @ 24V 50/60 Hz CNTRS75- LC1 D12

    Contactors, what are they used for?

    A contactor is an electrically controlled switch used for switching an electrical power circuit, such as a 24-volt coil electromagnet controlling a 230-volt motor switch.

    Thompson Machinery Contactor 5.5KW 12A @ 24V 50/60 Hz CNTRS75- LC1 D12 works for Thompson Meat Machinery: Mixer/Grinders, Flakers, Band Saws, and Pre-Breaker’s.

    R.A. Maxwell and Associates is located in Corona, California. We

  • Thompson Machinery Coupling 6mm Tube to Tube Connector Straight Union
    Coupling 6mm Tube to Tube Connector Straight Union

    Thompson Machinery Coupling 6mm Tube to Tube Connector Straight Union is used with Thompson Meat Machinery.

    R.A. Maxwell and Associates is located in Corona, California. We offer training, installation, service and parts for all of our inventory. Including the Thompson Machinery Coupling 6mm Tube to Tube Connector Straight Union and many others.
    Call, E-mail or visit us today for more information!

    235 Benjamin Dr. Suite 102
    Corona, C

  • Thompson Machinery Overload Relay 16-24 AMP OLRS1624- LRD22
    Thompson Machinery Overload Relay 16-24 AMP OLRS1624- LRD22, what are they used for?
    An electric overload occurs when too much current passes through electric wires. The wires heat and can melt, with the risk of starting a fire.
    Overloads provide protection against too much current that would cause overheating of the protected equipment.
    This Overload has been a trusted brand used by Thompson Meat Machinery. They are used in Thompson Meat Machinery: Mixer/Grinders, Flakers, Band Saws, and Pr

  • Thompson Machinery Overload Relay 23-32 AMP-OLRS23322-LDR332
    Overload Relay 23-32 AMP-OLRS23322-LDR332

    Overloads, what are they used for?
    An electric overload occurs when too much current passes through electric wires. The wires heat and can melt, with the risk of starting a fire.
    Schneider Overloads provide protection against too much current that would cause overheating of the protected equipment.
    The Schneider Overload has been a trusted brand used by Thompson Meat Machinery. They use them in their Mixer/Grinders, Flakers, Band Saws, and Pre-Bre

  • Thompson Machinery Overload Relay Sch 7-10 AMP OLRS710-LRD14
    Overloads, what are they used for?
    An electric overload occurs when too much current passes through electric wires. The wires heat and can melt, with the risk of starting a fire.
    Schneider Overloads provide protection against too much current that would cause overheating of the protected equipment.
    The Schneider Overload has been a trusted brand used by Thompson Meat Machinery. They use them in their Mixer/Grinders, Flakers, Band Saws, and Pre-Breaker’s.
    The Schneider Overloads are just o

  • Thompson Machinery Fuse 1 Amp (F) 5 x 20mm Ceramic Quick Acting-RSFS1A
    Thompson Machinery Fuse 1 Amp (F) 5 x 20mm Ceramic Quick Acting-RSFS1A

    R.A. Maxwell and Associates is located in Corona, California. We offer training, installation, service and parts for all of our inventory. Including the Thompson Machinery Fuse 1 Amp (F) 5 x 20mm Ceramic Quick Acting-RSFS1A and many others.
    Call, E-mail or visit us today for more information!

    235 Benjamin Dr. Suite 102
    Corona, CA 92879

    951-734-8152
    bob@ramaxwell.com

  • Thompson Machinery Fuse 3.15 Amp Anti Surge-RSFS3A
    Thompson Machinery Fuse 3.15 Amp Anti Surge-RSFS3A

    R.A. Maxwell and Associates is located in Corona, California. We offer training, installation, service and parts for all of our inventory. Including the Thompson Machinery Fuse 3.15 Amp Anti Surge-RSFS3A and many others.
    Call, E-mail or visit us today for more information!

    235 Benjamin Dr. Suite 102
    Corona, CA 92879

    951-734-8152
    bob@ramaxwell.com
1 - 10 of 119 products