Description

SmartLine Grader for Portioned Breast Fillets

General Description: The main components for the Smart Line Weight Grader are:

• Custom Built Dual Lane Slotted Infeed with Dual Lane In-Line

• Accelerator Conveyor

• Dual Lane Dynamic Weighing Unit 1450

• Dual Lane Eight (8) Gate Discharge Unit

• Gate type HND 400, 16 total gates

Dual Lane Slotted Infeed Conveyor with in-line Accelerator

The loading area of the dual lane slotted infeed conveyor allows room for plant personnel to load product into the individual pockets of the slotted infeed. The products are then transferred from the slotted infeed conveyor to the In-line accelerator conveyor via a wrap around hood. The slotted infeed belt is of Intralox series 1600 flat top, with 3" flights spaced on 6" centers. This actual pocket size is 5 3⁄4" long x 7 3⁄4" wide x 3" deep. The nominal speed of the infeed is 140 pockets per minute. The in-line transfer conveyor and slotted infeed are built as one unit. The products transfer from the wrap around hood of the slotted infeed onto the in-line transfer conveyor. The in-line accelerator conveyor ensures the product is properly spaced before transferring to the SmartLine Grader.

The In- line accelerator conveyor is equipped with Intralox series 1600 flat top belt, and a center drive type configuration. Nominal belt speed is 275 feet per minute. Conveyor construction is of stainless steel and UHMW plastic. The drive units are Sterling stainless steel gearboxes with Sterling stainless steel motors. Electronic speed controllers are included for final speed adjustment.

SmartLine Grader

Dual Dynamic Weighing Unit

The dual dynamic weighing unit structure is a non-tubular design equipped with a stainless steel drum motor drive. The weighing belt is of Intralox grid type and has a heavy-duty load cell to guarantee maximum durability.

Measurements

The unit is 57" long, and the weighing belts are 10" wide.

The weighing platform is 14" long, and the weighing unit is equipped with an M3210 touch screen indicator. Accuracy is +/- 1 gram at 92% of total throughput.

Dual Discharge Unit

The dual discharge unit structure is a non-tubular design equipped with a stainless steel drum motor drive. The gate arms gently pull the product off the belt and into the bin or chute. The width of the conveyor belts is 10". The spacing between each arm-support is 22".

HND 400 Gate

The discharge unit will be provided with sixteen gates, eight on each side. The chute will direct the products from the gate down into a box below. A packing shelf is provided for the boxes. A hand operated gate can be used to close the gate while replacing totes/boxes.

RAM Manufacturing Equipment located in Corona, California, offers training, installation, service and parts for all the machines we sell. Including the Marel Used Dual Lane Smart-Line Grader with 8 Gates Per Lane/ Custom Built Infeed and many others. Call or visit us today for more information!

Call or Visit at:
951-734-8152
235 Benjamin Dr. Suite 102
Corona, CA 92879